ABC OEM 931 60 022 Natural Brass Brake Pipe Connector ISO14001 TS16949 CCC

Quick Detail

Product Name: Brake Pipe Connector

Quality: ISO14001, TS16949, CCC

Brand: ABC / OEM

Body Color: Natural Brass

Connection: Thread x Tube

Brass Grade: H59

Part No. 3: 931 60 022

Thread x Tube, One Brass Body: One end is threaded and the other takes the air brake tube, so a single H59 brass connector joins a valve, tank or port to the pipe line without an extra adapter. The natural brass body keeps a machined sealing face and thread that hold a leak free joint at 1.6 MPa (16 bar) working pressure.

Natural Brass, Fleet Proven: H59 brass in natural brass finish resists condensation, road salt and oil mist better than plated or plastic parts, and the ABC / OEM brand program supplies the same connector under neutral or customer marking.

Description

Brake Pipe Connector with a thread x tube connection for air brake and pneumatic pipe lines on commercial vehicles. The threaded end screws into a valve, tank or port and the tube end takes the air brake pipe, so one H59 brass body joins both sides of the circuit without extra adapters. The machined thread and sealing face deliver a leak free joint at 1.6 MPa (16 bar) working pressure on air brake, ABS / EBS and air suspension lines, and the natural brass finish keeps the sealing face clean and reusable in fleet maintenance.

Supplied as part number 931 60 022 in the 931 series and available under the ABC / OEM brand program, the connector is produced under ISO14001, TS16949 and CCC certified quality control, with full dimension and thread inspection before packing, so each batch assembles the same way on the line and in the workshop. The H59 brass body carries the strength and thread accuracy needed for repeated tightening and rework.

Rated for air brake service from -40°C to +100°C, the H59 brass connector keeps its strength and thread accuracy in cold start and hot engine bay conditions. Engineered for high frequency fleet maintenance and OEM replacement, it suits bus, truck, trailer and semi-trailer air lines, and is supplied with neutral or custom packing for distributor and OEM programs.

Specifications

Notices

Open the packaging carefully, inspect the coupling body, sealing ring and tube ends for scratches or damage, and handle gently to avoid surface scratch or seal damage. Do not pull forcibly or bend sharply during installation to avoid safety risks of connection loosening and seal cracking. Installation should be performed by qualified personnel to ensure correct assembly, stable sealing performance, and service safety.