DC 12V 24V Step-Up 180W 5AMAX Output DC-DC Converter ISO14001 TS16949 CCC

Product Name: DC-DC Converter

Quality: ISO14001, TS16949, CCC

Output Current: 5 A

Power Rating: 180 W

Input Voltage: DC 12 V

Output Voltage: DC 24 V

12 V In, 24 V Out: A compact step-up module that turns a 12 V vehicle supply into a stable 24 V output, so 24 V equipment can run on a 12 V bus, truck or trailer without a second battery or a dedicated alternator.

180 W Module, Finned Aluminium Case: The switching stage is rated 180 W and housed in a finned aluminium case that spreads heat into the housing instead of building it up inside, and the module is produced under ISO14001, TS16949 and CCC quality control for vehicle electrical use.

DC-DC Converter for stepping a 12 V vehicle supply up to 24 V. The module takes a DC 12 V input and delivers a regulated DC 24 V output, so 24 V equipment such as lighting, radios, cameras and telematics can run on a 12 V bus, truck or trailer without a second battery or a separate alternator. The output delivers up to 5 A to the load, which covers a typical accessory bank on a commercial vehicle.

The converter is built on a step-up switching topology with a finned aluminium heatsink case, so heat from the switching stage spreads into the housing instead of building up inside. Input and output leads are fitted with terminals for a clean screw connection, and the module is produced under ISO14001, TS16949 and CCC quality control for vehicle electrical use.

The compact sealed body mounts on a panel or bulkhead in the cab, under the seat or in the battery box, and the regulated 24 V output holds steady through engine start and load switching on a 12 V system. It is suitable for bus, truck, trailer and semi-trailer electrical systems, fleet retrofits and OEM programs.

Open the packaging carefully, inspect the coupling body, sealing ring and tube ends for scratches or damage, and handle gently to avoid surface scratch or seal damage. Do not pull forcibly or bend sharply during installation to avoid safety risks of connection loosening and seal cracking. Installation should be performed by qualified personnel to ensure correct assembly, stable sealing performance, and service safety.