UL94 V-0 IEC 62368-1 OTP 100±5 °C 40A 180W DC-DC Converter ISO14001 TS16949

Product Name: 180W DC-DC Converter

Quality: ISO14001, TS16949

OTP Threshold: 100±5 °C

Inrush Current: ≤ 40 A

Flame Rating: UL94 V-0

Safety Standard: IEC 62368-1

Over-Temperature Cut-Out At 100 ±5 °C: An OTP threshold of 100±5 °C shuts the output down before the switching stage can cook itself, so a converter buried under a seat or in a battery box survives a hot engine bay instead of failing quietly.

UL94 V-0, IEC 62368-1, Inrush ≤ 40 A: The housing is rated UL94 V-0 and the module is built to IEC 62368-1, with inrush current held to 40 A or less so it does not trip a vehicle fuse or upset other loads on the same circuit.

180W DC-DC Converter for vehicle electrical systems, designed around protection rather than just output: an OTP threshold of 100±5 °C shuts the output down before the switching stage overheats, and inrush current is held to 40 A or less so the module does not trip a vehicle fuse or upset other loads on the same circuit when it is switched on.

The housing carries a UL94 V-0 flame rating and the module is built to IEC 62368-1, the safety standard now used for vehicle-mounted power equipment, so it can be specified into fleet retrofit and OEM programs without a separate safety review. A finned aluminium case spreads heat from the switching devices into the housing, and input and output leads are fitted with terminals for a clean screw connection.

Produced under ISO14001 and TS16949 quality control, the converter is engineered for high frequency fleet duty where the module runs with the vehicle every day. It suits bus, truck, trailer and semi-trailer electrical systems, and is packed neutral or with custom marking for distributor and OEM supply.

Open the packaging carefully, inspect the coupling body, sealing ring and tube ends for scratches or damage, and handle gently to avoid surface scratch or seal damage. Do not pull forcibly or bend sharply during installation to avoid safety risks of connection loosening and seal cracking. Installation should be performed by qualified personnel to ensure correct assembly, stable sealing performance, and service safety.