24V 12V Step-Down 15A Max Bus Truck 180W DC-DC Converter ISO14001 TS16949

Product Name: 180W DC-DC Converter

Quality: ISO14001, TS16949

System Voltage: 24V to 12V Step-Down

Power Rating: 180 W

Output Current: 15 A max

Output Voltage: DC 12 V

24 V Down To 12 V, 180 W: The module takes a 24 V vehicle system and delivers a regulated 12 V output at up to 15 A (180 W), so 12 V radios, cameras, GPS trackers and LED lighting can run on a 24 V bus or truck without a second battery.

Finned Aluminium Case: The step-down switching stage is housed in a finned aluminium case that spreads heat into the housing instead of building it up inside, and the module is produced under ISO14001 and TS16949 quality control for vehicle electrical use.

180W DC-DC Converter for stepping a 24 V vehicle system down to 12 V. The module delivers a regulated 12 V output at up to 15 A (180 W), so 12 V equipment such as radios, cameras, GPS trackers, LED lighting and phone chargers can run on a 24 V bus, truck or trailer without a second battery or a separate converter per device.

The converter uses a step-down switching topology with a finned aluminium heatsink case, so heat from the switching stage spreads into the housing instead of building up inside. Input and output leads are fitted with terminals for a clean screw connection, and the module is produced under ISO14001 and TS16949 quality control for vehicle electrical use.

The 15 A continuous output covers the combined load of a typical accessory bank, and the compact sealed body mounts on a panel or bulkhead in the cab, under the seat or in the battery box. It is suitable for bus, truck, trailer and semi-trailer electrical systems, fleet retrofits and OEM programs where 12 V equipment has to run from a 24 V supply.

Open the packaging carefully, inspect the coupling body, sealing ring and tube ends for scratches or damage, and handle gently to avoid surface scratch or seal damage. Do not pull forcibly or bend sharply during installation to avoid safety risks of connection loosening and seal cracking. Installation should be performed by qualified personnel to ensure correct assembly, stable sealing performance, and service safety.